ImmersionRC Vortex 230 Mojo International VersionV23STDIN
From the same team that brought you the successful ARF/RTF Vortex quads comes something with a little more spunk.
The Vortex 230 Mojo is a crossover race/freestyle quad, excellent on the track, and a heaps of fun for freestyling.
Un-box, install your receiver, mount the props and plug in your battery and be ripping around your local bando in 5 minutes flat.
ImmersionRC’s Synergy Electronics
The new ImmersionRC ‘Synergy’ flight controller integrates a full-graphic OSD and an onboard video transmitter based on the new Tramp HV design sporting all the lushness the NFC support brings, including full Wand and Android App compatibility.
Twin F3 processors ensure an 8kHz loop time and full support of BetaFlight 3.x. hence crispy smoothness is guaranteed as is full support for future upgrades such as BF 3.2 (which will be available as soon as 3.2 is released).
Factory calibrated power levels from 1mW -> 600mW, glitch-free channel changing, and a micro-power pit-mode ensure that the Vortex 230 Mojo will receive a warm welcome at any race event.
The Synergy weighs in at a mere ~6.5 grams, and is of course conformally coated to protect against the occasional accidental swim or unexpected downpour
Physical meets Virtual
ImmersionRC’s FPV Racing Simulator, Liftoff, has been used by many pilots to develop their skills without breaking a single prop.
Since its introduction, the simulator has steadily increased it’s feature set, now including all of the Vortex airframes, many race environments (including the famous Dubai World Drone Prix circuit), and recently a fantastic multi-player mode.
Race against other pilots in multiplayer mode, create tracks with the track builder, and download tracks built by the community.
Following our long-standing tradition, the Vortex 230 Mojo will soon join it’s brothers in this simulator.
Best Vtx in the Business, Fully Integrated!
Fully integrated is the best Vtx in the business – ImmersionRC’s Tramp HV, which is the Tx that race organizers worldwide demand.
Support for all standard FPV channels and power levels, from sub-1mW to >600mW, with Dynamic Power Control which allows pre-take-off power level to drop to sub-1mW while waiting on the starting grid, saving precious battery power, and keeping temperatures low.
After landing the power level is also dropped to a minimum to preserve battery life and prevent heat buildup, important during a search to help with localization using a directional antenna.
Integrated Touch’n’Race (TNR)
This is a bit of ImmersionRC magic. Change video transmission frequency without powering up the quad. So no stomping on someone else’s channel.
Arrive at your local park (or that secret bando) and set video frequency, and transmitter power, with a wave of the magic wand (the TNR Mini Wand) or the Android App.
No DIP switches, no buttons, no confusing blinky LEDs, and no scripts to run on your Taranis. We couldn’t have made it much simpler.
DSMX Video Transmitter Control
Another first in the FPV world, ImmersionRC has teamed up with Horizon Hobbies to integrate video transmitter control into certain Spektrum(tm) radios.
Quads using this feature power up safely in pit-mode, and after finding a free channel on the video goggles, the menu on the Spektrum radio may be used to select frequency band, channel, and power level.
Lights! Music! Action!
Ok, there is no music, we’ll leave that to the post-processing, but there are lights, and plenty of action!
A set of RGB LEDs sit on the tail of the Vortex 230 Mojo shine through a light-pipe diffuser, ensuring visibility from a wide angle.
Since Airgonay’s now-famous ‘Star Wars’ video, rear lights on mini-quads have become not a ‘nice to have’, but a ‘no fun without ‘m’.
‘Gen4’ 32bit 30A ESCs with DSHOT
Custom 32bit 30A ESCs supporting all of the common standards provide regenerative braking, for crisp-responsive flight using BetaFlight. A 32bit ARM processor runs each ESC, ensuring plenty of processing power to drive even the fussiest brushless motors.
Of course, no ImmersionRC ESC would be complete without our innovative rotorSENSE, which programs prop direction with the flick of a finger. No more swapping motor wires.
Full Graphic OSD, with EzOSD pedigree
An on-board full-graphic OSD provides in-flight updates of critical parameters and sports a menu which allows all options to be programmed in the field using the R/C Tx and a set of goggles, or, alternatively, an LCD screen.
A real-time interface with the flight controller enables artificial horizons, F-18 HUD style displays and exchange of critical flight parameters.
Automatic warnings for battery capacity, voltage, and remaining flight time keep the pilot updated before batteries are exhausted.
Custom OSD Layouts
Several OSD layouts are included in the package:
- A classical EzOSD-type layout, with all critical parameters available on-screen.
- A Heads-Up display which would be more at home in a fighter-jet, with artificial horizon and altitude indicator.
- A Race layout, with just the critical parameters, tucked around the edges of the display.
- All OSD layouts include screen-center alerts for critical warnings, such as battery voltage, EzUHF Link Critical, etc.
- Weight: ~348g without battery
- Power Requirements: 4s LiPo
- ESCs: Full Custom, 32bit, 30A cont. 40A peak, rotorSENSE, OneShot125/42, Multishot, DSHOT-600
- Motors: BrotherHobby R3 2206-2300kV
- Props: Black HQ 5x4.3x3 V1S Tri-Blades
- Flight Camera: 600TVL CCD , FatShark 'Gen3' Sony Sensor/Sony Chipset
- Receiver Compatibility: CPPM, S-Bus, Spektrum™, XBus, SumH, SumD, iBus (no external adapters required)
- Flight Time: Highly dependent upon battery, and flying style
Included in the box;
- 1x Vortex 230 Mini Race Quad, Fully assembled and flight-tested
- 2x ImmersionRC Branded battery straps (Installed)
- 1x SpiroNET Omni 5.8GHz antenna (Stubby, v2)
- 1x PPM Interface Cable
- 1x Spektrum(tm) Interface Cable
- 1x SBus Interface Cable
- 8x HQ 5x4.3x3 V1S 3-Blade Props
- Foam piece for HD camera mounting
We Also Recommend
ImmersionRC LapRF Personal Race Timing System - LAPRF1
ImmersionRC Vortex 150 Mini Racing Quadcopter
ImmersionRC Vortex 180 Racing Quadcopter