LOOKING TO BUY A DIATONE MAMBA F405 FLIGHT CONTROLLER + F40 ESC POWER STACK MK2 IN AUSTRALIA? YOU'VE COME TO THE RIGHT PLACE. ANY QUESTIONS? PLEASE LIVE CHAT US, WE'RE HERE TO HELP!
Mamba F405 FC
- Item name: F405 Betaflight Flight Controller
- FIRMWARE TARGET ： FURYF4OSD （LEGACY）
- Input power: 12.6-25V (3-6S)
- BEC: 5V/1.5A
- MCU: STM32F405
- Gyro: MPU6000
- Flash: 16MB
- OSD: AT7456
- Mounting hole: 30.5*30.5mm
- Weight: 6g
Mamba F40 ESC
- Item name: Mamba F40HV ESC
- Input voltage: 3-6S (12.6V~25V)
- Continue current: 40AA×4
- Burst current: 40/50A (6S)
- BEC: NO
- Mounting: 30mm / φM3
- Weight: 10g
- Motor：Suggest Below 1900KV for 6S
- 1 x Mamba F405 MK2 Betaflight Flight Controller
- 1 x Mamba F40 HV ESC
- Before soldering or mounting any flight controller, connect it to your PC and verify operation
- Incorrect soldering techniques will damage this board and void warranty. Please use the correct sized tip, temperature and technique. Temp controlled soldering irons (such as the TS100) are available for under $100 and will make soldering much easier.
- Lifted pads are a result of incorrect soldering techniques or excess mechanical pressure and will not be covered under warranty.
- USB ports must be handled with care, breakage of usb ports are not covered under warranty
- Always use a smoke stopper before powering your build for the first time.