LOOKING TO BUY A DIATONE MAMBA F405 MINI MK2 F30MINI 30A 3-5S ESC FLIGHT CONTROLLER STACK IN AUSTRALIA? YOU'VE COME TO THE RIGHT PLACE. ANY QUESTIONS? PLEASE LIVE CHAT US, WE'RE HERE TO HELP!
MAMBA F405 MK2 Mini Betaflight Flight Controller & F30A 2-5S DSHOT600 FPV Racing Brushless ESC
- Mamba F405 Mini FC MK2
- Item name: F405 mini Betaflight Flight Controller
- Input: 2~6 S LIPO (7.4V~24V)
- BEC: 5V 2A
- MCU: STM32F405
- Gyro: MPU6000
- FLASH: 16M
- OSD: AT7456
- Mounting Hole: M3
- Weight: 3.5g
- FIRMWARE TARGET ： FURYF4OSD （LEGACY）
- MAMBA F30 MINI Dshot600 4IN1 ESC 30A 5S
- INPUT VOLTAGE: 2~5 S Lipo
- CONTINUE CURRENT: 30A×4
- BURST CURRENT: 40A (10S)
- BEC: NO
- MOUNTING: 20×20mm,⌀ 2
- Supply : Rubycon High Frequency 470uF/35V
- Mamba F4 Mini Betaflight Flight Controller
- Mamba F30 Mini HV ESC
- 1 x Mamba F4 Mini Betaflight Flight Controller
- 1 x Mamba F30MINI HV ESC
- Before soldering or mounting any flight controller, connect it to your PC and verify operation
- Incorrect soldering techniques will damage this board and void warranty. Please use the correct sized tip, temperature and technique. Temp controlled soldering irons (such as the TS100) are available for under $100 and will make soldering much easier.
- Lifted pads are a result of incorrect soldering techniques or excess mechanical pressure and will not be covered under warranty.
- USB ports must be handled with care, breakage of usb ports are not covered under warranty
- Always use a smoke stopper before powering your build for the first time.