SPEEDYBEE F7 V2 FLIGHT CONTROLLER AND 45A ESC STACK

SpeedybeeSKU: SPEEDYBEE-STACK

Price:
Sale price$139.95

Shipping calculated at checkout

Stock:
In stock (10 units), ready to be shipped

Description

SPEEDYBEE F7 V2 Stack.
The worlds first FC with wireless firmware flasher and Blackbox analyzer.

SpeedyBee F7V2 Specifications

  • MCU STM32F722
  • IMU MPU6000
  • USB Type-C
  • Baro BMP280 (I2C)
  • OSD BetaFlight OSD w/ AT7456E chip
  • BLE Support, used for Flight Controller configuration
  • WiFi Support, used for data transfer, e.g firmware
  • flashing, and Blackbox analysis.
  • DJI Air Unit slot A full DJI Air Unit JST slot onboard
  • BlackBox 16MB onboard dataflash
  • Current Sensor 1 : 10 (Scale 168)
  • BetaFlight Camera Control Pad Yes
  • Power input 3S - 6S Lipo
  • 5V power output 7 * 5V output, 6 pads and a BZ+ pad used for Buzzer, the maximum load current is 2.5A. 9V * 1,
  • the maximum load current is 2.5A.
  • 9V power output 2 * 9V output, 1 pads and another one used for DJI slot
  • 4.5V power output 1 * 4.5V output pad
  • 3.3V power output 1 * 3.3V output pad, the maximum load current is 500mA.
  • ESC signal M1 - M4
  • UART Full UART * 5(UART1, UART2, UART3, UART5, UART6)
  • ESC Telemetry UART UART4 RX
  • I2C Used for external Magnetometer, Sonar, etc.
  • LED pin Used for WS2812 LED
  • Buzzer BZ+ and BZ- pad used for 5V Buzzer
  • Boot button Used to easy enter DFU mode
  • RSSI input RSSI input solder pad
  • SmartPort Use any TX pad of UART for the SmartPort feature.
  • Support Flight Controller Firmware BetaFlight(Default), EMUFlight
  • Target name SPEEDYBEEF7V2
  • Mounting 30.5 x 30.5mm, 4mm hole size
  • Dimension 41 x 38 x 6.9mm
  • Weight 9g

SpeedyBee BLHeli32 45A 4 in 1 ESC Specifications

  • Firmware BLHeli32 SpeedyBee 4in1
  • MCU STM32F051
  • Continuous Current 45A * 4
  • Burst Current 55A(10S)
  • ESC Protocol DSHOT300/600/1200
  • Power input 3S - 6S LiPo
  • Power output VBAT
  • Current Sensor Support (Scale 168)
  • ESC Telemetry Support
  • Mounting 30.5 x 30.5mm, 4mm hole size
  • Dimension 41 * 45 * 6.5mm
  • Weight 12.5g




Please note due to the possibility of causing heat damage when soldering, once this product has been modified and or soldered to warranty is voided.

    Estimate shipping

    You may also like

    Recently viewed