Aikon SEFM 30A 2-6s ESC Blheli_S
Aikon SEFM 30A 6S (1pc)
The Aikon SEFM 30A 6S is a new generation ESC that uses a variety of bleeding edge technologies in hardware and firmware.
Note: The 30A 6s ESC's are DSHOT capable without hardware modification.
What makes SEFM different?
- Totally new MCU that comes with a three channel PMW output specifically designed for motor control applications and runs at 48mhz.
- New BLHELI_S firmware which provides all the strengths of the original BLHELI, but adds some significant improvements such as better response and smoother start up, 1000 steps of throttle input resolution, and auto-detection of the input signal protocol.
- Higher quality MOSFETs with extremely low internal resistance
- Three exceptionally fast dedicated MOSFET drivers
- Extra capacitance to help remove EMF spikes and keep the rest of your equipment safe.
- Battery 2-6s
- Constant Current 30A
- Burst Current 40A
- Size 15*28.5mm
- Firmware Blheli_S C_H_25
- MCU 8BB21
- Bootloader Yes
- Weight( with/wire) 9g
- Signal wire length 150mm
- Battery wire length 100mm
Please Note: Correct soldering technique, including appropriate tip size, temperature control and flux use is essential. Poor soldering technique will void your warranty.