CL RACING F4 20x20 - MINI FLIGHT CONTROLLERCLRF4MFC
Enjoy the full size CL Racing FC lineup? Want to take a similar product into the world of brushless micros? Look no further than this 20x20mm option! It's got everything you expect,
- Built in Betaflight OSD
- STM32F405 @168mhz
- Direct 2-6S input
- MPU6000 gyro
- Filtered 5V and 9V BEC's
- Direct stack on Frsky xm+ rx
- 4 in 1 ESC socket and direct solder on 4 in 1 ESC pads.
- Build in Camera control resistor and capacitor
- Current sensor input solder pad
- Inverter for Sbus (on UART1),
- TX4(uart4) near VTX pads for easy smart audio or tramp wiring
- 4 UARTS ---- TX6(uart6) SAT(uart6 RX ), RX4 ( uart4 ), RX3 TX3( UART3 )
- Direct solder 4 in 1 esc cable easy to adapt to all ESC
- 1x CL Racing F4 Mini FC
- 6x Rubber Grommets
- 6x M2 Reducers
- Before soldering or mounting any flight controller, connect it to your PC and verify operation
- Incorrect soldering techniques will damage this board and void warranty. Please use the correct sized tip, temperature and technique. Temp controlled soldering irons (such as the TS100) are available for under $100 and will make soldering much easier.
- Lifted pads are a result of incorrect soldering techniques or excess mechanical pressure and will not be covered under warranty.
- USB ports must be handled with care, breakage of usb ports are not covered under warranty
- Always use a smoke stopper before powering your build for the first time.
We Also Recommend
WHITENOISE SYNERGY F4 AIO FLIGHT CONTROLLER REVISION F