CL Racing F4S Flight Controller

CLRF4SFC

  • $54.95

Add to Wishlist

CL Racing F4S Flight Controller

The latest version of the CL Racing F4 is here (V1.5). The F4S version, this CLF4 FC is packed full of the latest features and technology in the industry, like camera control. Loved because of its dependability and affordability, the CL Racing F4S is a fan favorite!

CLRACING F4S AIO

Note: If you solder on the buzzer, go to CLI paste " set beeper_frequency = 0" enter and "save"

New features:

  • Build in 5V BEC 2A
  • Build-in User selectable 9v or 5v 2A Filtered BEC For camera and VTX
  • Dedicated hardware inverted connect to UART3 for smartport telemetry
  • 6 layer 2oz Copper PCB
  • Dedicated Camera setting control pads along with camera power signal pads
  • 4 in 1 esc socket with external current sensor input
  • Added TX1 and TX6 pads
  • Support External Current sensor from 4 in 1 ESC.

Specifications:

  • LiPo Input: 2-6S (5V-30V)
  • Power rail: 3.3v,5v,9v,vbat
  • 132A ( MAX display ) Current sensor with 160A PDB build in
  • 6 layer 2oz Copper PCB
  • Size: 36x36mm
  • Mount Holes: 5 x 30.5 mm
  • CPU - STM32F405RGT6 (F4 chip)
  • MPU-6000
  • Full SD Card socket
  • Build in 5V BEC 2A
  • Build-in User selectable 9v or 5v 2A Filtered BEC For camera and VTX
  • Dedicated Camera setting control pads along with camera power signal pads
  • Dedicated VTX connection with along with TX4 for easy connect and control VTX
  • Build in Betaflight OSD
  • 4 UARTS + USB (UART1 , UART3 ,UART4, UART6 ) (Pinout TX1, TX4,RX4, TX6,RX6 )
  • 5V LED strip output
  • 4 motors on each corner for a better layout.
  • Support RX : Dedicated Sbus hardware inverted ,Satellite RX, Ibus, TBS Crossfire
  • Dedicated hardware inverted connect to UART3 for smartport telemetry
  • 4 in 1 esc socket with external current sensor input
  • Support TP and Smartaudio VTX
  • Buzzer pads for external buzzer

Important Notes: 

  • Before soldering or mounting any flight controller, connect it to your PC and verify operation
  • Incorrect soldering techniques will damage this board and void warranty. Please use the correct sized tip, temperature and technique. Temp controlled soldering irons (such as the TS100) are available for under $100 and will make soldering much easier.
  • Lifted pads are a result of incorrect soldering techniques or excess mechanical pressure and will not be covered under warranty. 
  • USB ports must be handled with care, breakage of usb ports are not covered under warranty
  • Always use a smoke stopper before powering your build for the first time. 

CL Racing F4S Flight Controller


We Also Recommend