DIATONE MAMBA F405 FLIGHT CONTROLLER MK2

FC-MAMBA F405 MK2

  • $37.95
  • Save $9.00

Will be in stock after
Add to Wishlist

Replacement flight controller for the Diatone Mamba F405 MK2 40A 30x30 3-6s

Mamba F405 Flight Controller Betaflight STM32 MPU6000 OSD Built-in 5V/2A BEC

Specifications
  • MCU: 168MHz STM32F405RGT6 32BIT
  • IMU: MPU6000
  • Baro: No
  • OSD: BF OSD
  • Blacbox: 16M Flash Memory
  • Uarts: 3Set
  • ESC Soft: Dshot300/600/1200
  • ESC Telemetry: RX6
  • LED: Blue&Orange for FC Status,Green 9V,White 5V,Red 3.3V
  • WS2812 LED Control: BF LED Control
  • Smartaudio: Yes
  • RSSI: Yes
  • Buzz: Yes

PDB Specifications

  • Input: 3~6S Lipo (12.6~25V)
  • VTS Protection: Yes
  • BEC: 5V 2A & 9V 2A (Max 3A)

FC Firmware
  • BetaFlight Target: FURYF4OSD

Physical
  • Mounting: 30.5×30.5mm,Φ3
  • Dimensions:
  • Weight: 20g

Package Includes
  • 1 X DIATONE MAMBA F405 FLIGHT CONTROLLER MK2

Important Notes: 

  • Before soldering or mounting any flight controller, connect it to your PC and verify operation
  • Incorrect soldering techniques will damage this board and void warranty. Please use the correct sized tip, temperature and technique. Temp controlled soldering irons (such as the TS100) are available for under $100 and will make soldering much easier.
  • Lifted pads are a result of incorrect soldering techniques or excess mechanical pressure and will not be covered under warranty. 
  • USB ports must be handled with care, breakage of usb ports are not covered under warranty
  • Always use a smoke stopper before powering your build for the first time.


Manual MK2

We Also Recommend