LOOKING TO BUY A DIATONE MAMBA F50 BL32 DSHOT1200 4IN1 ESC 50A 32BIT 6S 30*30mm IN AUSTRALIA? YOU'VE COME TO THE RIGHT PLACE. ANY QUESTIONS? PLEASE LIVE CHAT US, WE'RE HERE TO HELP!
MAMBA F50_BL32 Dshot1200 4IN1 ESC 60A 6S 30*30mm
Diagram Link From Help Centre Link
- INPUT VOLTAGE: 3~6S Lipo (12.6V~25.2V)
- CONTINUE CURRENT: 50A×4
- BURST CURRENT: 60A (10S)
- BEC: NO
- SUPPORTS: Dshot300/600/1200
- Target：BLHeli_32 MAMBA F50_BL32
- TVS Protection: Yes
- MOUNTING: 30.5mm/M3
- Supply : 8pin sh1.0 ×2
- AMASS Original XT60
- High-Frequency 470uF/35V
- 1×FC MAMBA F50PRO BL32 ESC
- Before soldering or mounting any flight controller, connect it to your PC and verify operation
- Incorrect soldering techniques will damage this board and void warranty. Please use the correct sized tip, temperature and technique. Temp controlled soldering irons (such as the TS100) are available for under $100 and will make soldering much easier.
- Lifted pads are a result of incorrect soldering techniques or excess mechanical pressure and will not be covered under warranty.
- USB ports must be handled with care, breakage of usb ports are not covered under warranty
- Always use a smoke stopper before powering your build for the first time.