DIATONE MAMBA F722 APP F50 BL32 3-6S FLIGHT CONTROLLER STACK

DIATONESKU: JH60378

Price:
Sale price$166

Shipping calculated at checkout

Stock:
In stock (2 units), ready to be shipped

Description

LOOKING TO BUY A DIATONE MAMBA F722 APP F50 BL32 3-6S FLIGHT CONTROLLER STACK IN AUSTRALIA? YOU'VE COME TO THE RIGHT PLACE. ANY QUESTIONS? PLEASE LIVE CHAT US, WE'RE HERE TO HELP!

CHECK OUT OUR GREAT RANGE OF DIATONE PRODUCTS HERE

MAMBA F722S APP I2C WIFI F50PRO 3-6S Flight Controller Stack

Firmware Target /Config: Mamba F722 I2C
About WIFI APP

Diagram Link From Help Centre Link

Note:Since STM32F722 heat large , please leave at least 5mm interspace at both sides of the FC with nothing covered to make sure a good air circulation.

Update Details:

  • BT to WiFi
  • USB power supply can use receiver, OSD
  • Add a group of I2C pads (SCL SDA)
  • Add inverter Dual-Way TX serial port
  • Add 2812 LED switch function, key can turn off led
  • Add 4 corner LED interface to support BF led and Mamba led
  • Upgrade to stronger type-C, optimize pad position




FC Specifications

  • MCU: 216MHz STM32F722RET6 32BIT
  • IMU: MPU6000
  • Barometer: No
  • OSD: BF OSD
  • Blacbox: 16M Flash Memory
  • Uarts: 6Set
  • ESC Soft: Dshot300/600/1200
  • ESC Telemetry: RX6
  • LED indicator: Blue&Orange for FC Status,Green 9V,White 5V,Red 3.3V
  • LED Controller:BF LED/MB LED( 4 Set 2812 LED)
  • WIFI: SpeedyBee APP
  • Smartaudio: Yes
  • Buzz: Yes
  • Input: 3~6S Lipo (12.6~25V)
  • TVS Protection: Yes
  • BEC: 5V 2.5A & 9V 2A (Max 3A)
  • MOUNTING: 30.5mm/M3 WEIGHT: 9g
  • Supply :
  • 8pin sh1.0 *1
  • Smartaudio: Yes
  • Buzz: Yes
  • Input: 3~6S Lipo (12.6~25V)
  • VTS Protection: Yes


ESC Specifications

  • F50 BL32
  • INPUT VOLTAGE: 3~6S Lipo (12.6V~25V)
  • CONTINUE CURRENT: 50A×4
  • BURST CURRENT: 60A (10S)
  • BEC: NO
  • ESC Dshot300/600/1200
  • MOUNTING: 30.5mm/M3
  • Supply : Panasonic High Frequency 470uF/35V
  • Mounting: 30.5×30.5mm,Φ3
  • Dimensions:
  • Weight: 22g


Includes

  • 1× MAMBA F722 APP <WIFI> F50 BL32

Important Notes: 

  • Before soldering or mounting any flight controller, connect it to your PC and verify operation
  • Incorrect soldering techniques will damage this board and void warranty. Please use the correct sized tip, temperature and technique. Temp controlled soldering irons (such as the TS100) are available for under $100 and will make soldering much easier.
  • Lifted pads are a result of incorrect soldering techniques or excess mechanical pressure and will not be covered under warranty. 
  • USB ports must be handled with care, breakage of usb ports are not covered under warranty
  • Always use a smoke stopper before powering your build for the first time.

 





About SpeedyBee Function:

For WIFI

 


 

F722 APP MK1 50 BL32 Diagram


Estimate shipping

You may also like

Recently viewed