The Smart Port Brushless RPM and dual temperature sensor plugs into a Smart Port equipped receiver (X series, it will not work with D series receivers). Join the red and black wires to any 2 of the 3 wires going to your brushless motor, and you can now read the RPMs. You will need to identify how many poles your motor has and that is about it. Now you can fine tune your prop/motor/battery combinations without guessing anymore! See what that prop is actually doing in the air. But FrSky has even more to offer. What good is knowing the RPM if we don't know how our temps are doing as well? So FrSky has included not one, but 2 temperature sensors. Now we can make sure our new prop is not cooking our speed control or battery!
The FrSky Smart Port RPM and Temperature Sensor has been designed to work with FrSky Smart Port systems, it can measure the RPM of brushless motors from 1,000~30,000rpm and temperatures of -20 to 250 degrees celsius. Other FrSky Smart Port enabled sensors including the variometer, lipo voltage, GPS, current and airspeed sensors can be used at the same time.
Installing is easy, just connect the sensor to any 2 wires on the brushless motor by the supplied JST cable and then plug the smart port lead into the smart port enabled receiver. 2 temperature sensors are supplied which are plugged to the PCB so you can use a single one or both. Attach the temperature sensor to your ESC to enjoy the full benefit and peace of mind from this fantastic product. Set up is very straightforward using the push button and LED status indicator.
Please note: The FrSky Smart Port RPM/Temperature Sensor is only compatible with FrSky Smart Port enabled receivers such as the X8R, X6R and X4R.
- Measures RPM from 1,000~30,000rpm
- Measures temperature from -20~250°C
- Simple and easy to install
- Small and lightweight
- LED status indicator
- Easy push button set up
- Compatibility FrSky Smart Port enabled receivers, such as X8R, X6R, X4R, etc.
- Dimension 29×20×2mm
- Weight 6.7g
- Operating Voltage Range DC 4 -10 V
- Measurement Range -20~250 degrees Celsius/ -4~482 degrees Fahrenheit
- Current consumption 25mA@5V