HGLRC F4 Flame Flight Controller OSD, BEC, PDB

HGLF4FL

  • $52.95

Only 1 left!
Add to Wishlist

HGLRC F4 Flame Flight Controller

The HGLRC F4 Flame is a powerful all in one flight controller combining on screen display (Betaflight), power distribution board and a 5V, 3A power supply for powering camera and receiver.

Features;

  • STM32F405 MCU, 8K
  • MPU6000 SPI bus
  • Built-in BETAFLIGHT OSD, PID tuning
  • Built-in 5V/3A BEC
  • Built-in current sensor
  • Directly weld PDB
  • 16M Flash
  • Supports SBUS,PPM,DSMX receivers.
  • With buzzer, LED program, voltage monitor
  • Features 90+ cap on the underside of the board, to help prevent video interference. additional 470uf cap included for best video performance


Specifications;

  • Item name: STM32F405 F4 Flight Control
  • Betaflight target: OMNIBUSF4
  • Weight: 11g
  • Size: 36*36mm
  • Board thickness: 1.2mm
  • Copper foil: 3OZ*6Layer 18OZ
  • Current: max 300A+
  • Lipo: 2-6S
  • Mounting hole: M3 30.5*30.5mm

Package Includes;

  • 1 x HGLRC F4 Flame Flight Controller
  • 1 x Standoff kit
  • 1 x 470uf 25V Capacitor
  • 1 x Quick start manual

Important Notes: 

  • Before soldering or mounting any flight controller, connect it to your PC and verify operation
  • Incorrect soldering techniques will damage this board and void warranty. Please use the correct sized tip, temperature and technique. Temp controlled soldering irons (such as the TS100) are available for under $100 and will make soldering much easier.
  • Lifted pads are a result of incorrect soldering techniques or excess mechanical pressure and will not be covered under warranty. 
  • USB ports must be handled with care, breakage of usb ports are not covered under warranty
  • Always use a smoke stopper before powering your build for the first time. 

 

Important Notes: 

  • Incorrect soldering techniques will damage this board and void warranty. Please use the correct sized tip, temperature and technique. Temp controlled soldering irons (such as the TS100) are available for under $100 and will make soldering much easier.
  • Lifted pads are a result of incorrect soldering techniques and will not be covered under warranty. 
  • USB ports must be handled with care, breakage of usb ports are not covered under warranty
  • Always use a smoke stopper before powering your build for the first time. 

HGLRC F4 Flame Flight Controller

Customer Reviews

No reviews yet Write a review

We Also Recommend