HGLRC F4 V5PRO Flight Controller + 5.8GHz VTX w/ OSD, PDB, BEC

More info »
Add to Wishlist
10+ items in stock

HGLRC F4 V5PRO Flight Controller + 5.8GHz VTX w/ OSD, PDB, BEC

The HGLRC F4 V5 pro is a powerful all in one flight controller combining a video transmitter, on screen display (betaflight), power distribution board and a 5V, 3A power supply for powering camera and receiver.

Just add frame, motor, ESC's, antenna and a receiver and go!

Warning: As with all video transmitters, do not power up the unit unless you have the antenna connected. Powering up a video transmitter with the no antenna will destroy the transmitter.

Features:

  • Lightning fast F4 processor for high 8k loop times 
  • Built-in swamp free VTX with switchable power and pit mode.
  • Compact form factor and all in one easy installation 
  • Built-in BETAFLIGHT OSD to achieve remote control PID parameters
  • Buzzer/programming LED/voltage monitoring / BLHELI-S ESC programming
  • Supports SBUS / PPM / DSMX and other mainstream receivers
  • Black box FLASH 16M large capacity storage 


Specifications:

  • Product name: F4 V5PRO Flight Controller 0/25/200/600mW Switchable FPV Transmitter w/ 5V BEC PDB
  • Chip: STM32F405RGT6 , dual open 8K, MPU6000-SPI connection
  • Built-in 5V / 3A BEC output
  • Direct connection from ESC PDB
  • Built-in current sensor
  • FPV Transmitter: 0/25/200/600mW 40CH switchable transmitter
  • Input voltage: 2-6S
  • Board thickness: 1.6MM
  • Copper foil thickness: 3OZ * 4
  • Maximum current: 200A
  • Hole mounting size: M3 30.5 * 30.5mm
  • Weight: 13.5g


Includes:

  • 1x F4 AIO controller 
  • 1x MCX-SMA connector antenna
  • 1x XT60 connector
  • Buzzer
  • 25v 470uf capacitor (subject to variation)
  • Camera, Receiver, Accessory connectors

Manual is available for download here

Warning: As with all video transmitters, do not power up the unit unless you have the antenna connected. Powering up a video transmitter with the no antenna will destroy the transmitter.

Note: While this product requires minimal soldering, incorrect soldering techniques will damage this board and possibly void warranty. Please use the correct sized tip, temperature and technique. Temp controlled soldering irons (such as the TS100) are available for under $100 and will make soldering much easier. 

 

HGLRC F4 V5PRO Flight Controller + 5.8GHz VTX w/ OSD, PDB, BEC