HGLRC F4 V6PRO Flight Controller 5.8G 48CH VTX 5V BEC PDB OSD

  • $91.95

Only 2 left!
Add to Wishlist

The HGLRC F4 V6 pro is a powerful all in one flight controller combining a video transmitter, on screen display (betaflight), power distribution board and a 5V, 3A power supply for powering camera and receiver.

Just add frame, motor, ESC's, antenna and a receiver and go!

Warning: As with all video transmitters, do not power up the unit unless you have the antenna connected. Powering up a video transmitter with the no antenna will destroy the transmitter.

Features:

  • Lightning fast F4 processor for high 8k loop times 
  • Built-in swamp free VTX with switchable power and pit mode.
  • Compact form factor and all in one easy installation 
  • Built-in BETAFLIGHT OSD to achieve remote control PID parameters
  • Buzzer/programming LED/voltage monitoring / BLHELI-S ESC programming
  • Supports SBUS / PPM / DSMX and other mainstream receivers
  • Black box FLASH 16M large capacity storage 

Specifications:

  • Product name: F4 V6PRO Flight Controller
  • Chip: STM32F405RGT6 , dual open 8K, MPU6000-SPI connection
  • Built-in 5V / 3A BEC output
  • Direct connection from ESC PDB
  • Built-in current sensor
  • FPV Transmitter: 0/25/200/600mW 40CH switchable transmitter
  • Input voltage: 2-6S
  • Board thickness: 1.6MM
  • Copper foil thickness: 2OZ * 8
  • Maximum current: 200A
  • Hole mounting size: M3 30.5 * 30.5mm
  • Weight: 15.6g

Package Includes:

  • 1 X F4 V6PRO Flight Controller
  • 1 X SMA Antenna Pigtail Cable

Warning: As with all video transmitters, do not power up the unit unless you have the antenna connected. Powering up a video transmitter with the no antenna will destroy the transmitter.

Important Notes: 

  • Incorrect soldering techniques will damage this board and void warranty. Please use the correct sized tip, temperature and technique. Temp controlled soldering irons (such as the TS100) are available for under $100 and will make soldering much easier.
  • Lifted pads are a result of incorrect soldering techniques and will not be covered under warranty. 
  • USB ports must be handled with care, breakage of usb ports are not covered under warranty
  • Always use a smoke stopper before powering your build for the first time. 

We Also Recommend