HGLRC F420 F4M3 FLIGHT CONTROLLER & 20A BLHeli_S 2-4S 4in1 ESC STACK

HGLF420

  • $94.95

Only 8 left!
Add to Wishlist

HGLRC F420 F4M3 FLIGHT CONTROLLER & 20A BLHeli_S 2-4S 4in1 ESC STACK

Model: HGLRC 20x20mm F4M3 Flight Control Board Betaflight OSD 5V BEC

  • Weight: 5.8g
  • F4M3 Flight Control Board ( D-Shot Version)
  • MPU: MPU6000-SPI
  • CPU: STM32F405RGT6, Dual 8K.
  • Black Box: Flash 16M
  • Input Voltage: 2-4S Lipo 
  • Built-in Betaflight OSD to adjust PID
  • BEC Output: 5V@3A
  • Installing Hole:20x20mm, mounting holes (M3)
  • Size: 30x30mm (main board)
  • Support SBUS/PPM receiver 

Model: HGLRC DShot20A BLHeli_S 2-4S 4-in-1 ESC
  • Input Voltage: 2-4S Lipo battery
  • Constant Current: 20A-4S
  • Peak Current: 25A/10S
  • BEC Ouput: NO
  • Firmware: BLHELI_S 
  • Size: 30x30mm (main board)
  • 35x38mm (including pad)
  • Installing Hole:20x20mm,M3
  • Weight: 8.2g
  • CPU:EFM8BB21F16G-C
  • MOS Tube: TOP QUALITY MOSFET
  • Protocol: DSHOT600/300/150/Oneshot125/42,MultiShotDamped mode

Package Includes;
  • 1x HGLRC F4M3 Flight Control Board
  • 1x HGLRC DShot20A BLHeli_S 2-4S 4-in-1 ESC

Important Notes: 

  • Before soldering or mounting any flight controller, connect it to your PC and verify operation
  • Incorrect soldering techniques will damage this board and void warranty. Please use the correct sized tip, temperature and technique. Temp controlled soldering irons (such as the TS100) are available for under $100 and will make soldering much easier.
  • Lifted pads are a result of incorrect soldering techniques or excess mechanical pressure and will not be covered under warranty. 
  • USB ports must be handled with care, breakage of usb ports are not covered under warranty
  • Always use a smoke stopper before powering your build for the first time. 



We Also Recommend