HGLRC TITAN PLUS F460 FLIGHT CONTROLLER & 60A BLHELI_32 3-6S ESC STACK

HGLF460

  • $139.95
  • Save $40

Only 5 left!
Add to Wishlist

HGLRC TITAN PLUS F460 FLIGHT CONTROLLER & 60A BLHELI_32 3-6S ESC STACK

AIRBUS F4OSD Flight Control Board ( D-Shot Version)

  • MPU: MPU6000-SPI
  • CPU: STM32F405RGT6, Dual 8K.
  • Black Box: Flash 16M
  • Input Voltage: 2-6S Lipo 
  • Built-in Betaflight OSD to adjust PID
  • BEC Output: 5V@3A
  • Size: 36x36mm board, 30.5mm mounting holes (M3)
  • Weight:8.3g
  • Support SBUS/PPM/DSMX receiver 

DinoShot60A 3-6S BLHeli_32 4-in-1 ESC
  • Input Voltage: 3-6S Lipo battery
  • Constant Current: 60A-4S/50A-5S/40A-6S
  • Peak Current: 70A
  • BEC Ouput: NO
  • Firmware:32bit ESC with BLHELI_32 firmware
  • Size: 36x36mm (main board)
  • 40x48mm (including pad)
  • Installing Hole:30.5x30.5mm,M3
  • Weight: 12.9g
  • CPU:STM32F051
  • MOS Tube: TOP QUALITY MOSFET
  • Protocol: DSHOT1200/600/300/150/Oneshot125/42,MultiShotDamped mode,forward and reverse turn
Package Includes:
  • 1x HGLRC AIRBUS F4OSD Flight Control Board
  • 1x HGLRC DinoShot60A 3-6S BLHeli_32 4-in-1 ESC
  • 1x SH1.0 8PIN 60MM Cable

Specifications:

  • Model: HGLRC TITAN PLUS F460 Stack
  • Weight: 21.2g
  • Usage: for 130mm-280mm Frame Kit

Important Notes: 

  • Before soldering or mounting any flight controller, connect it to your PC and verify operation
  • Incorrect soldering techniques will damage this board and void warranty. Please use the correct sized tip, temperature and technique. Temp controlled soldering irons (such as the TS100) are available for under $100 and will make soldering much easier.
  • Lifted pads are a result of incorrect soldering techniques or excess mechanical pressure and will not be covered under warranty. 
  • USB ports must be handled with care, breakage of usb ports are not covered under warranty
  • Always use a smoke stopper before powering your build for the first time. 

We Also Recommend