IFLIGHT IH2 HD WHOOP CADDX VISTA DIGITAL HD SYSTEM

iFLIGHTSKU: C008214

Receiver: R-XSR
Price:
Sale price$404

Shipping calculated at checkout

Stock:
Only 1 unit left

Description

The iH2 BNF from Iflight is equipped with the HD Vista system from Caddx. This Whoop HD accepts 2 inch propellers with ducts but also 2.5 inch propellers without ducts. Uses the DJI camera for the best current video available.

Features

  • 126.5 grams without battery
  • Butter smooth XING-E 1204
  • Duct prop guards to protect the sensitive environment or yourself
  • Pre-tuned with smooth freestyle settings


iH2 HD BNF Specs:

  • SucceX-E mini F4 + mini 35A stack
  • Motor: XING-E 1204 4500KV
  • Wheelbase: 120mm
  • Body size: 100*68mm
  • Bottom plate thickness: 2.5mm
  • Top plate thickness: 1.5mm
  • Top and bottom plate spacing: 22mm (aluminum column height 25mm)
  • Ducted propeller size: 2 inch
  • Maximum propeller size without ducts: 2.5 inch props
  • FC pattern: 20*20mm,16*16mm
  • FPV cam spacing: 19mm
  • Weight: 126.5g (without battery)
  • Flight time: 5-6 min cruising

PRE-TUNED & PRE-SETUP:

  • Don't worry about tuning, we did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!
  • To restore lost tunes or updates, please check our linked article on "Firmware/Factory Dumps"
  • Angle-Mode (self balancing level mode) is enabled by default to make sure your first flight doesn't end in a mess!
  • Please check our linked article on "How to disable Angle-Mode, activate Acro-Mode"



iH2 HD Quad BNF Included Components and Parts

Prebuilt and tested Quadcopter

  • 1x iH2 HD Frame
  • 1x Caddx Vista Digital HD System Kit
  • 1x TPU Antenna holder
  • 2x TPU camera side plate soft mount
  • 2x Emax 2 inch / 2.5 inch 3-blades (Set of 4 - Color May Vary)
  • 1x iFlight Lipo Strap

FC // SucceX-E Mini F4

Specifications:

 

  • MCU:168MHz STM32F405
  • Gyro:MPU6000
  • Blackbox:8MB
  • Betaflight OSD:YES
  • BEC:5V 2.5A
  • Uarts:4
  • ESC Telemetry:yes
  • INA Pad:nuart2
  • Input voltage:2-6S
  • Size:25*25mm /20*20mm φ3 mounting
  • Weight: 4g
  • Firmware:BETAFLIGHTF4


Physical

  • Mounting hole:20*20mm,φ3mm
  • Size:25*25mm


ESC // SucceX-E Mini 35A

Top Features:

  • 6 layers double-sided PCB board
  • 2oz 1.4mm thick power board
  • TDK MLCC Low ESR ceramic capacitors
  • Top grade 2R203 MOSFET


Specification:

  • MCU: BB21 F16G
  • BLHeliS
  • Capacitance: 470uF/50V
  • Current Sensor: Yes
  • Input: 2-6S LIPO
  • Constant: 35A / Burst: 40A
  • BEC: No
  • Supports up to Dshot600, Proshot, Oneshot, Multishot
  • Target: G-H-30
  • Weight:6.9g
  • Mounting pattern: 20*20, φ3mm with Grommets φ2mm
  • Dimensions: 31*30mm (including the power pads)

 

Additional Suggested Parts

  • DJI HD FPV Goggles
  • Radio Controller
  • DJI Remote Controller
  • Battery 4S 450mAh



Important

The DJI Remote Controller is recommended for beginners since you won't need to set up another receiver, but it is also optional in this BNF drone because it is NOT required in order to use the FPV system. If you don't choose to use the DJI Remote Controller, you can choose a receiver option for your transmitter and then bind to your own radio as usual.

Estimate shipping

You may also like

Recently viewed