Kamikaze F4 Nano Flight Controller

  • $29.95
  • Save $10

Only 1 left!
Add to Wishlist

F4 Flight controller with 20x20 mm mounting holes.

Using F405 with ICM20608 GYRO, onboard PDB and PWM output on corner,

Supports direct 1-4s LIPO input(1A BEC),NO FLASH.

Software controlled inverter for UART1 (needs Betaflight update)

Features:
  • STM32 F405 MCU, Using Betaflight Airbot F4 target
  • SBUS/PPM input (Pinheaders)
  • 4PWM output (Pinheaders)
  • Only 25x25mm, mount holes 20x20mm
  • ICM-20608 Gyro over SPI BUS
Package includes:
  • 1 x Flight Controller

Important Notes: 

  • Before soldering or mounting any flight controller, connect it to your PC and verify operation
  • Incorrect soldering techniques will damage this board and void warranty. Please use the correct sized tip, temperature and technique. Temp controlled soldering irons (such as the TS100) are available for under $100 and will make soldering much easier.
  • Lifted pads are a result of incorrect soldering techniques or excess mechanical pressure and will not be covered under warranty. 
  • USB ports must be handled with care, breakage of usb ports are not covered under warranty
  • Always use a smoke stopper before powering your build for the first time. 

We Also Recommend