KISS ESC 24A Race Edition


  • $37.95

Will be in stock after
Add to Wishlist

KISS ESC 24A Race Edition

The KISS ESC line offer great compatibility to a wide range of motors, Years of hard work have gone into making this product from the genius minds at Flyduino.

The fast 32 bit Arm Cortex CPU does an excellent job at running the ESC very effectively, of course reaction times are top notch.

The 24 RE layout is a beefy ESC which will withstand quite some abuse due to FPV races, several mechanisms doing its best to protect your valuable equipment, the rating of 24A does not require direct cooling, mounted partially covered is acceptable.

No need to worry about different firmware, simply solder and fly (confident soldering skills are required).

This is the first ESC with oneshot42 support (don't worry, Oneshot125 and normal PWM are auto detected too).

Beside this, this is the first ESC that offers a easy to use telemetry function over the regular servo connector which you can use in combination with the KISS-FC, no external parts are required for info like voltage, current and even RPM on your OSD (MinimOSD supported) or on your receiver LCD screen (Frsky-Taranis, etc.).


  • 1x KISS ESC 24A RE assembled board


  • 32-bit ARM Cortex MCU @ 48Mhz

  • Telemetry capability (current, voltage and speed / RPM will be covered by the ESC itself and to compatible devices such as our KISS FC forwarded)

  • Overcurrent protection (measures the current and limited active at 30A)

  • Fast reacting overtemperature protection (reducing the gas when exceeding 120 ° C (reduces the power, not simply shutting down the unit)

  • Advanced Auto Timing (3.25 to 30 ° are at each engine step readjusted, unique to the 32bit Kiss ESC line)

  • For Race Multicopter Developed (24A continuous without direct cooling *)

  • High max. Speed (450.000ERpm, 64.000Rpm at a 14POL Motor)

  • Small dimensions (19 x 27 mm)

  • Weight: 3.6g

  • Fine speed control (about 950 steps, real resolution)

  • No external ElKo (electrolytic capacitor) necessary **

  • Fast reacting gas changes

  • Linear throttle response

  • Active freewheeling enabled (little diode losses resulting in higher efficiency) 

  • Regenerative braking, thereby rapid throttle response at deceleration (the ESC uses active freewheeling and regenerative braking, 2 independent features which relates to each other in different working states) 

  • Fast switching FET by the use of gate drivers

  • Minimal dead times by an adaptive dead time

  • 2-5S LiPo capable **

  • Oneshot42, Oneshot125 and normal (25 - 500Hz) PWM is detected automatically. 

Made in Europe

This Device is ESD sensitive, take precautions in any way, this is no "your coffee is hot warning", its physics we can't avoid, the smaller electronic becomes, the more ESD sensitive it is.

Read the Wiki section for Electrostatic Discharge before soldering.

Manual v1.2 for KISS ESC24A

special features (not needed for regular use!)



KISS ESC 24A Race Edition

Customer Reviews

Based on 8 reviews Write a review

We Also Recommend