Sale price$109.95

Shipping calculated at checkout

Contact Us


Looking to buy a MATEK F405-WSE WING FLIGHT CONTROLLER in Australia? You've come to the right place. Any questions? please live chat us, we're here to help!

Check out our great range of Matek products here

FC Specifications

  • MCU: 168MHz STM32F405RGT6 1MB Flash
  • IMU: MPU6000 (SPI1)
  • Baro: DPS310 (I2C1)
  • OSD: AT7456E (SPI2)
  • Blackbox: MicroSD socket (SPI3)
  • VCP & 6x UARTs,
  • 1x Softserial_Tx option (TX2 pad, INAV)
  • 10x PWM outputs(S1~S9, LED)
  • 2x I2C
  • 3x ADC (voltage, current, RSSI)
  • 3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red)
  • Built in inverter on UART2-RX for SBUS input
  • PPM/UART Shared: UART2-RX
  • 1x SH1.0_6pin connector (4V5/G/TX4/RX4/DA2/CL2) for GPS/compass
  • 1x SH1.0_6pin connector for external USB and buzzer
  • DJI FPV OSD: any spare UART
  • FrskyOSD: any spare UART
  • 6~30V DC IN (2~6S LiPo)
  • 132A high-precision Current Sense (Scale 250)
  • PDB/Current sense resistor: 60A continuous, 132A burst.
  • BEC 5V 2A for FC & Peripherals
  • BEC Vx 5A for servos, 5V/ 6V option
  • BEC 8V 1.5A for VTX and camera
  • LDO 3.3V 200mA
  • Battery Voltage Sensor: 1k:10k
FC Firmware
  • INAV Target: MATEKF405SE
  • ArduPilot hwdef: MATEKF405WING
  • Dimensions: 44 x 29 x 10 mm
  • Mounting: 25 x 25mm, Φ2mm
  • Weight: 20g w/ bottom plate and USB/buzzer adapter
Package contains
  • 1x FC F405-WSE
  • 1x USB(Type-C)/Buzzer (Active) Adapter
  • 1x Bottom plate, 44 x 29mm
  • 2x JST-SH-6P to JST-SH-6P cables, 20cm
  • 5x Brass standoffs, M2*4mm
  • 10x screws, M2*3.5mm
  • Dupont 2.54 pins (Board is shipped unsoldered)
F405-WSE Quick Start Guide (PDF)

You may also like

Recently viewed