MATEK F411-WING FLIGHT CONTROLLER

F411-WING

  • $51.95

Only 1 left!
Add to Wishlist

LOOKING TO BUY A MATEK F411-WING FLIGHT CONTROLLER IN AUSTRALIA? YOU'VE COME TO THE RIGHT PLACE. ANY QUESTIONS? PLEASE LIVE CHAT US, WE'RE HERE TO HELP!

CHECK OUT OUR GREAT RANGE OF MATEK PRODUCTS HERE

The INAV capable Matek F411-Wing is a smaller version of the 405-Wing Flight Controller. Even though it's smaller, doesn't mean it skimps on features. It comes equipped with many of the essential features found on the full-size version such as multiple BECs, a current sensor, OSD, Barometer, and an MPU6000 IMU.

The small size (28 x 41mm) means it can fit on almost any size of aircraft. This FC is perfect for smaller sized fixed-wing aircraft that are tight on space.

Differences between the 405-Wing and 411-Wing
Features the 411 is missing compared to the 405

  • Blackbox Logging
  • No 12V BEC for FPV gear
  • No RSSI input
  • Lower current 5V BEC at 3A (F405 wing has 5A BEC)
  • 2 UARTS (F405 wing has 6)
  • 1 I2C (F405 wing has 2)
  • Smaller current sensor (78A vs 104A)
  • Lower current 3.3V BEC at 200mA (F405 wing has 300mA)

Specifications

  • MCU: 100MHz STM32F411
  • IMU: MPU6000 accelerometer/gyro (SPI)
  • Baro: BMP280 (I2C)
  • OSD: INAV OSD w/ AT7456E chip
  • Blackbox: No
  • VCP & 2x UARTs
  • 2x Motors, 5x Servos outputs
  • 1x I2C
  • 3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)
  • Built-in inverter for SBUS input (UART1-RX)
  • SoftSerial_Tx1: ST1 pad by default
  • PPM: ST1 pad with softserial disabled
  • Battery Voltage Sensor: 1:10 (Scale 1100)
  • WS2812 Led Strip : Yes
  • Beeper : Yes
  • RSSI: No
  • FC Firmware

INAV Flight

  • Target: MATEKF411

PDB

  • Input voltage range: 6.5~30V (2~6S LiPo) w/TVS protection
  • 2x ESC power pads
  • Current Senor: 78A, 3.3V ADC, Scale 423

BEC 5V output

  • Designed for Flight controller, Receiver, OSD, Camera, Buzzer, 2812 LED_Strip, Buzzer, GPS module, AirSpeed
  • Continuous current: 2 Amps

BEC Vx output

  • Designed for Servos
  • Voltage adjustable, 5V Default, 6V via jumper
  • Continuous current: 3 Amps

BEC 3.3V output

  • Designed for Baro / Compass module/ OLED and Spektrum RX
  • Linear Regulator
  • Continuous current: 200mA

Physical

  • Mounting: 24 x 24mm, Φ2mm
  • Dimensions: 41 x 28 x 10mm
  • Weight: 7g (Total 12g w/ bottom plate and M2 standoffs)

Resources and Downloads

 

LOOKING TO BUY A MATEK F411-WING FLIGHT CONTROLLER IN AUSTRALIA? YOU'VE COME TO THE RIGHT PLACE. ANY QUESTIONS? PLEASE LIVE CHAT US, WE'RE HERE TO HELP!

CHECK OUT OUR GREAT RANGE OF MATEK PRODUCTS HERE

Customer Reviews

Based on 2 reviews Write a review

We Also Recommend