MATEK F722-WPX FLIGHT CONTROLLER

MATEKSKU: MAT-F722-WPX

Price:
Sale price$96.95

Shipping calculated at checkout

Stock:
In stock (6 units), ready to be shipped

Description

LOOKING TO BUY A MATEK F722-WPX FLIGHT CONTROLLER IN AUSTRALIA? YOU'VE COME TO THE RIGHT PLACE. ANY QUESTIONS? PLEASE LIVE CHAT US, WE'RE HERE TO HELP!

Check out our great range of Matek products here

FC Specifications

  • MCU: 216MHz STM32F722RET6
  • IMU: MPU6000 (SPI)
  • Baro: DPS310 (I2C)
  • OSD: Pixel OSD/FrskyOSD (Uart6)
  • Blackbox: MicroSD socket (SPI)
  • 6x UARTs(5 Spare) with built-in inversion
  • 1x Softserial_Tx option
  • 10x PWM outputs
  • 1x I2C
  • 4x ADC (VBAT, Current, RSSI, AirSpeed)
  • 1x SH1.0_6pin connector (4V5/G/TX4/RX4/SDA/SCL) for GPS/compass
  • 1x SH1.0_6pin connector for external USB and buzzer
  • Dual Camera Inputs switcher
  • Vbat filtered power ON/OFF switcher
  • PWM camera menu control: Not supported by INAV
  • DJI FPV air unit: any spare UART

Power

  • 6~30V DC IN (2~6S LiPo)
  • 132A high-precision Current Sense (Scale 250)
  • PDB/Current sense resistor: 60A continuous, 132A burst.
  • BEC 5V 2A for FC & Peripherals
  • BEC Vx 5A for servos, 5V/ 6V option
  • Vbat filtered output 1A for VTx and Camera
  • LDO 3.3V 200mA
  • Battery Voltage Sensor: 1:10 (Scale 1100)

FC Firmware

  • INAV target: MATEKF722PX

Physical

  • Dimensions: 44 x 29 x 10 mm
  • Mounting: 25 x 25mm, Φ2mm
  • Weight: 20g w/ bottom plate and USB/buzzer adapter
Including
  • 1x FC F722-WPX
  • 1x USB(Type-C)/Buzzer (Active) Adapter
  • 1x Bottom plate, 44 x 29mm
  • 2x JST-SH-6P to JST-SH-6P cables, 20cm
  • 5x Brass standoffs, M2*4mm
  • 10x screws, M2*3.5mm
  • Dupont 2.54 pins (Board is shipped unsoldered)

PLEASE NOTE: SD CARD AND M8Q-5883 are not included

Estimate shipping

You may also like

Recently viewed