MATEK FCHUB-W PDB FOR FIXED WINGS / INAV

MATEKSKU: FCHUB-W

Price:
Sale price$22.95

Shipping calculated at checkout

Stock:
In stock (3 units), ready to be shipped

Description

LOOKING TO BUY A MATEK FCHUB-W PDB FOR FIXED WINGS / INAV IN AUSTRALIA? YOU'VE COME TO THE RIGHT PLACE. ANY QUESTIONS? PLEASE LIVE CHAT US, WE'RE HERE TO HELP!

CHECK OUT OUR GREAT RANGE OF MATEK PRODUCTS HERE

PDB

  • Input voltage range: 9~30V (3~6S LiPo) w/TVS protection
  • 2x ESC power pads
  • Current Sensor: 104A, 3.3V ADC, Scale 317
  • 4x BEC on board
  • 3x LED indicators for 5V, 10V & Vx
Soldering Holes & Pads
  • + & – : Battery & ESC power pads
  • Curr: Current sensor output
  • Vbat: Battery voltage
  • G: Ground
  • 3V3: LDO 3.3V
  • 5V: BEC 5V
  • 10V: BEC 10V
  • Vx: BEC 5V/6V/7.2V ADJ

FFC connection

  • Compatible with MATEKSYS FC F405-STD, F722-STD, F405-OSD
  • MT1: Motor1 of INAV Flying Wing & Airplane
  • MT2: Motor2 of INAV Flying Wing & Airplane
  • SV3~SV6: Servo 3~6 of INAV Flying Wing & Airplane
  • VTX: Video Transmitter signal
  • TX5 & RX5: UART5 of F405-STD/F722-STD/F405-OSD

BEC 5V output

  • Designed for Flight controller, Receiver, OSD, Camera, Buzzer, 2812 LED_Strip, GPS module
  • DC/DC synchronous buck regulator
  • Voltage: 5.0 +/- 0.1VDC
  • Continuous current: 2 Amps, Max.3A
  • Output Ripple: 20mV (VIn=24V, VOut=5V@2A load)
  • Short-circuit tolerant (2 seconds)

BEC 10V output

  • Designed for Video Transmitter, Gimble
  • DC/DC synchronous buck regulator
  • Voltage: 10.0 +/- 0.2VDC (Input voltage >11V)
  • Continuous current: 2 Amps, Max.3A
  • Output Ripple: 20mV (VIn=24V, VOut=10V@2A load)
  • Short-circuit tolerant (2 seconds)

BEC Vx output

  • Designed for Servos
  • DC/DC synchronous buck regulator
  • Voltage adjustable, 5V Default, 6V or 7.2V via jumper
  • Continuous current: 5 Amps, Max.5.5A
  • Output Ripple: 50mV (VIn=24V, VOut=5V@5A load)
  • Short-circuit tolerant (2 seconds)

BEC 3.3V output

  • Designed for Baro / Compass module and Spektrum RX
  • Linear Regulator
  • Continuous current: 500mA

Physical

  • Mounting: 30.5 x 30.5mm, Φ3mm
  • Dimensions: 52 x 36 x 6 mm
  • Weight: 13g

LOOKING TO BUY A MATEK FCHUB-W PDB FOR FIXED WINGS / INAV IN AUSTRALIA? YOU'VE COME TO THE RIGHT PLACE. ANY QUESTIONS? PLEASE LIVE CHAT US, WE'RE HERE TO HELP!

CHECK OUT OUR GREAT RANGE OF MATEK PRODUCTS HERE

Estimate shipping

You may also like

Recently viewed