Naze "Acro" Flight Controller - Genuine

This product is currently sold out.

Notify Me

Naze32 will no longer be stocked in favour of the FMR Kakute 

Direct from Japan, Designed and made by timecop these are one of the best (if not the best) sport flying flight controller on the market today, it really is an amazing piece of kit for its size and price, though does requires a fair bit of reading to configure and get running correctly.

At the heart of the Naze32 is a 32bit ST micro work horse of a processor, with untapped memory and cpu power and a host of equally impressive sensors. The Naze is also matched up with some of the nicest GUI programs and features to get the most out of your configuration.


Note;

  • All boards ship with angled header pins only
  • Current Naked Boards are latest Rev 
  • Configurable with baseflight via onboard USB connector 
  • If you would like your board with header pins installed please select from the drop down menu your requirements (note stock is not always available) 
  • Depending on the batch from timecop they are supplied randomly in either white, black, red, blue or purple
  • If you do not have a PPM or SBUS enabled receiver you will need to add a Naze Breakout Cable to your order for the Rev5 - for Rev6 requires a straight 10 pin header instead of 2x5 pin header.

Naze32 Rev6 Features:

  • USB on right side
  • PPM/PWM input as through-hole 
  • 3.3V, I2C on standard-size headers 
  • Fully pinout compatible with rev5 accessories (OSDoge etc) 
  • SBUS Inverter built in
  • Spectrum satellite 
  • MPU6500 
  • Sonar pads w/resistors added for direct connection to 5V sonar 
  • All extra pads (FT, GP, A5) on top, only sonar on bottom 
  • BMP280 barometer 
  • 16mbit flash

 Specifications:

  • 36x36 mm (30.5mm Mounting)
  • 5.3 grams (no headers, 7.3 grams with) 
  • 2000 degrees/second 3-axis MEMS gyro + accelerometer (MPU6500) 
  • Input voltage: Max 16V on input rail and up to 35V 6s on the voltage sense line
  • STM32F103CBT6 32-bit ARM Cortex M3 processor (72MHz, 3.3V)
  • Invensense MPU6500 MEMS accelerometer + gyro
  • BMP280 Barometer
  • Built-in Micro-USB for programming/firmware update
  • 36x36mm size, ~5 gram weight w/o headers
  • Made in JAPAN
  • Shipping with 16V input capable voltage regulators

 
Naze32 Acro Rev 5 Features/Specifications - No longer available

  • STM32F103CBT6 32-bit ARM Cortex M3 processor (72MHz, 3.3V)
  • Invensense MPU6050 MEMS accelerometer + gyro
  • Built-in Micro-USB for programming/firmware update
  • 36x36mm size, ~5 gram weight w/o headers
  • Fly in manual or self-level mode
  • Made in JAPAN 

Customer Reviews

Based on 3 reviews Write a review