RotorX Atom V3 RX122 Mini Quadcopter DIY ARF Pro Kit

RotorX Atom V3 RX122 Mini Quadcopter DIY ARF Pro Kit

  • $549.95

Will be in stock after
Add to Wishlist

RotorX Atom V3 122mm Mini Quadcopter DIY ARF Pro Kit

Cutting edge drone technology meets open source development. RotorX are the pioneers of micro scale drone racing technology, including custom designed high performance motors and propellers

The Ultimate Out of Body Experience

This is the ultimate out of body experience. It puts you in an entirely new dimension with your surroundings. Feel the thrill of flying like you’ve never had before. Putting you in an entirely new dimension with your surroundings.

Superb Handling

Built for tight space flying, perfect for indoors or outdoors
RotorX micro drones are designed for maximum functionality and performance.Our lightweight drones are optimized for fast speed, superb handling, and immense power.


Palm size 122mm and it's lighter than 250g

The Atom weighs less than 5 ounces, well under 250 grams, The Atom is a 122mm size quadcopter, half the size as our competitors. Larger drones need more space to fly in, while the Atom can fly inside the house, or out in a huge field, and everywhere in-between. The Atom V3 DIY Kit (ARF)

PLEASE REFER TO THE ONLINE MANUAL BEFORE BUILDING THIS KIT


Contents

  • 2 x M3x6mm Steel Hex Screw (Black)
  • 2 x M3x12mm Steel Hex Screw (for mounting through selected cam mount and canopy)
  • 2 x M3x6mm Countersunk Philips Head screw (For mounting SMA adapter to canopy)
  • 2 x M3x6mm Raw Aluminum standoffs (for mounting top rear of powercube for canopy)
  • 4 x T-Motors 1406 4100kv motors (including mounting hardware in bags) 
  • 8 x RX3040T propellers (with adapters nuts and screws) (colors may vary from pictures shown)
  • 1 x TBS/RX 2in1 Silabs ESC layer (Pre-assembled)
  • 1 x Colibri Flight Controller layer (Pre-assembled)
  • 1 x PDB layer VTX/OSD/DCDC/5V Reg (Pre-assembled)
  • 1 x Plastic Cube base plate with 2 x M3x7mm Countersunk Screw (for frame mounting)
  • 1 x Atom Canopy (Polycarbonate) 
  • 1 x XT30 connector with 70mm Cable (Pre-assembled/Soldered)
  • 1 x FPV Camera (cc1563) with 110deg fov lens
  • 3 x FPV Camera mounting plate (15/30/45 degrees) 
  • 1 x 5.8ghz Linear Whip - uFL connector 
  • 1 x RPSMA uFL Adapter 
  • 1 x TBS Triumph CP Antenna 
  • 2 x Rubber stick pads for battery friction mounting
  • 1 x Battery Strap







Customer Reviews

Based on 1 review Write a review

We Also Recommend