TRANSTEC F411 MINI FLIGHT CONTROLLER

TransTECSKU: TTF411MINI

Price:
Sale price$43.95

Shipping calculated at checkout

Stock:
Sold out

Description

TRANSTEC F411 MINI FLIGHT CONTROLLER (Also drop in replacement for HOMFPV WINGSUIT S HD)

FEATURES

  • MCU : STM32F411
  • IMU : MPU6000 Low noise with power filter
  • Anti-Vibration silicone grommets built in
  • 2x Uarts(1,2) with built-in SBUS inversion
  • 4x Dshot/Proshot/Oneshot outputs(Support Bidshot)
  • Betaflight OSD support
  • Support hardware beeper
  • 1x JST-SH 1.0_8pin connector (G/Vbat/S1/S2/S3/S4) for ESC
  • 1x JST-SH 1.0_3pin connector for Camera
  • 1x JST-SH 1.0_4pin connector for Vtx
  • 1x JST-SH 1.0_4pin connector for Receiver
  • WS2812 LED Strip support (5V output)
  • Third party receiver solder pad (UART1)
  • Input : 6~20V (2~4S LiPo)
  • BEC : 5V 2A cont. (Max.3A)
  • Weight : 4.2g
  • Micro-USB connector

INCLUDED :

  • 1x TransTEC F411 Mini
  • 5x Soft mount rubber
  • 2x 6pin JST-SH 1.0 connector (ESC)
  • 1x 3pin JST-SH 1.0 connector (Camera)
  • 1x 4pin JST-SH 1.0 connector (Vtx)
  • 1x 4pin JST-SH 1.0 connector (Receiver)

Important Notes: 

  • Before soldering or mounting any flight controller, connect it to your PC and verify operation
  • Incorrect soldering techniques will damage this board and void warranty. Please use the correct sized tip, temperature and technique. Temp controlled soldering irons (such as the TS100) are available for under $100 and will make soldering much easier.
  • Lifted pads are a result of incorrect soldering techniques or excess mechanical pressure and will not be covered under warranty. 
  • USB ports must be handled with care, breakage of usb ports are not covered under warranty
  • Always use a smoke stopper before powering your build for the first time.

You may also like

Recently viewed