VORTEX 275 PRO ARF 350MW METALL DANNY EDITION

V27PAT5G8350MD

  • $179.00
  • Save $570.00

Discontinued
Will be in stock after
Add to Wishlist

Metall Danny Special Edition

ALL GONE, SORRY - WILL NOT RESTOCK.

Yesssss! While on a visit to the ImmersionRC dungeon we found a handful of Metall Danny Edition Vortex 275's sitting in the corner, all wrapped up, brand spanking new, including a sweet customised carry case. These bad boys are super easy to fly, take a beating (yes they are a tank!!!) and the best part is if you do break something we have all the spares in stock at a very reasonable price, including a full arm kit which includes; motor, prop, plastics, cf 6" arm and an esc so you can hot-swap within minutes. 

Customised for a Legend

Metall Danny’s thrilling forest flying videos inspired a generation of FPV Pilots.

The Vortex 275 Metall Danny Special Edition was customized for Danny, to meet the needs of forest flying. With the classical robustness of the Vortex 250 Pro, longer arms to swing 6″ props, custom 2205 V-Spec motors, and a CCD Camera.

In a world where quads are getting smaller, and their ability to carry a GoPro disappears, the Vortex 275 likes to be a little different.

Tuned by a Pro

As with all Vortex quads, pro-tunes are included to eliminate the complex tuning process. Danny has tweaked the PIDs to perfection, and we have included them in the default firmware for the quad.

Out with Steel, in with Titanium!

The stock Vortex 250 Pro shipped with a steel screw-set. Extremely strong, un-necessary weight when whipping around a dense forest.
The Metall Danny edition replaces this with a Titanium screw set, significantly lighter, and much stronger than aluminium equivalents.

V-Spec 2205-2100kV Power

Custom V-Spec 2205-2100kV motors swing 6″ props with anger! These motors were custom-designed for this quad.
Beautifully milled and anodized, using single-strand wiring.
Robust enough to survive the occasional ‘kiss’ from a passing pine-tree.

Don’t like the Green?, Pimp It!

The Metall Danny edition is 100% compatible with the numerous ‘pimp kits’ available for the Vortex 250 Pro. Colors include (among others):

  • Hot Pink
  • Lime Green
  • White
  • Black
  • Orange
  • Purple
  • Transparent (Freybott)

Specifications

  • Retail Price ($USD): $499
  • Weight: ~435g without battery, or HD camera
  • Power Requirements: 3s-4s LiPo (typical) 4s Lipo Recommended
  • ESCs: Full Custom, 20A cont. 22A peak, rotorSENSE, OneShot125
  • Motors: Custom V-Spec 2205-2000kV, with 3mm axles, 5mm shafts
  • Props: OEM HQ 6035
  • Flight Camera: FatShark 600 TVL CCD (HS1177-equivalent, included)
  • HD Camera: GoPro Hero, Hero 3/4
  • Receiver Compatibility: CPPM, S-Bus, Spektrum™, XBus, SumH, SumD (no external adapters required)
  • Flight Time: Highly dependent upon battery, and flying style

Included in the box:

  • Retail Price ($USD): $499 (MD Logo zipper case)
  • Initial Release Date: August 2016
  • Weight: ~435g without battery, or HD camera
  • Power Requirements: 3s-4s LiPo (typical) (recommend 4s)
  • ESCs: Full Custom, 20A cont. 22A peak, rotorSENSE, OneShot125
  • Motors: Custom V-Spec 2205-2000kV, with 3mm axles, 5mm shafts
  • Props: OEM HQ 6035
  • Flight Camera: FatShark 600 TVL CCD (or equivalent)
  • HD Camera: GoPro Hero, Hero 3/4/5
  • Receiver Compatibility: CPPM, S-Bus, Spektrum™, XBus, SumH, SumD (no external adapters required) (Auto-Sense!)
  • Flight Time: Highly dependent upon battery, and flying style
Note: Compatible receiver and display device required for initial setup and use, not included.

We Also Recommend