Tattu 10000mAh 44.4V 30C 12S Lipo Battery Pack With AS150U Plug For UAV Drones

TattuSKU: TA-30C-10000-12S1P-AS150U

Price:
Sale price$644

Shipping calculated at checkout

Stock:
Contact Us

Description

Tattu batteries provide high quality, reliable power for your Multirotor or Aircraft.

All Tattu LiPos are packed with vibration and fire-proof materials, and our luxury battery box ensures that your battery is safe in transit. Our automatic cell matching process. Different from our Gens Ace brand, Tattu is specially made for our UAV and UAS market. We live by our slogan, "less is more," with more flight time, more enjoyment, and more satisfaction while keeping our batteries light in weight.

NOTE: Please do not choose expedited shipping unless you live in greater Sydney as batteries cannot be shipped by Air.

Specifications

  • Balancer Connector Type: Molex
  • Brand: Tattu
  • Capacity(mAh): 10000
  • Balancer Wire Length(mm): 100
  • Configuration: 12S1P
  • Connector Type: AS150U
  • Discharge Rate (C): 30
  • Height(±2mm): 115
  • Length(±5mm): 182
  • Max Burst discharge Rate (C): 60
  • Net Weight(±20g): 2800
  • Over 300wh: Yes
  • over_power: Yes
  • Voltage(V): 44.4
  • Width(±2mm): 67
  • Wire Gauge: 8#
  • Discharge Wire Length(mm): 160

Lipo Battery Safety 

  • Batteries should NEVER be left unattended while charging.
  • Be absolutely sure that the Lithium Polymer charger settings are correct for the battery pack being charged – both voltage and current settings.
  • Lithium Polymer must be CHARGED and STORED in a fire-safe container like a Lipo Sack.
  • Do not charge batteries near flammable items or liquids.
  • Keep a dry fire extinguisher nearby or a large bucket of dry sand, which is a cheap and effective extinguisher.
  • Never charge inside an automobile even when parked.
  • KEEP BATTERIES AWAY from children and pets at ALL times.
  • Never discharge below 3.5V per cell as it may cause permanent damage and void warranty
  • Battery may explode if damaged or disposed of in fire
  • Never leave batteries inside a car on a hot day or any other place where temperature may exceed 140F / 60C.
  • Although environmentally friendly, lithium polymer cells must be FULLY discharged before disposal. Use a resistor setup (light bulbs, for example) to accomplish this, to avoid the possibility of a short-induced fire after disposal.
  • Immediately discharge damaged batteries at 1/2 C rate and dispose
  • Do not put the loose cells in a pocket, bag, or drawer where they could short-circuit against other items, or the battery tabs could be pressed against each other.
  • Take care that the cells are not punctured, especially by metallic objects like hobby knives.
  • If the electrolyte in the cells should get on your skin, thoroughly wash with soap and water. If in the eyes, rinse thoroughly with cool water. Immediately seek medical attention for this, or for burns.

You may also like

Recently viewed