Schwifty Longrange Packs
Made in Australia using only 100% genuine cells
Constructed using 99.9% pure 10mm .2 nickel strip that will take ALL the amps!
Lightweight compared to a Lipo of same capacity
Long service life compared to Lipo (300+ cycles)
Will never puff/distort like a Lipo
Each battery is tested prior, during and after assembly to ensure you are getting the best of the best, a battery you can depend on! Batteries are designed with Tpu end caps to hold the cells securely in place and allow sufficient space between cells to maximise cooling and eliminate any potential shorting/heat soak between cells, something other manufacturers overlook.
Cells are spot welded into packs with a KWELD welder, this welder measures total current of the weld ensuring consistent spot welds throughout. It also tests each weld indicating if the weld was successful or not so there is no second-guessing. This is one of the best welders available on the market.
Whether your cine-whooping a film set and looking for multiple runs to get that shot, If your getting a little Schwifty bombing down mountains at range with your 7” quad, trying to fly your wing to the moon, exploring your local spot with a 5” or even re-powering your old plumbus, Schwifty packs are designed to give you that piece of mind to take you all the way and give you that distance to brag about!
- Configuration 4S1P Li-Ion
- Capacity 4200mAh
- Cell Model Molicel P42A 21700
- Max Charge Voltage 16.8V
- Max Discharge Voltage 10v
- Nominal Voltage 14.4V
- Dimensions 48*48*75mm Appr.
- Weight 303g (+/-2g)
- Max Cont. Discharge (current) 45a
- Operating Voltage 2.5-4.2 VPC
- Balance Connector JST-XH
- Main Connector XT-60 100mm
- Working Temperature Charge 0~60°C
- Working Temperature Discharge (-40~60°C)
- Standard Charge Current 1C (4.2A)
- Fast Charge Current 1.5C (6.3A)