SpeedyBee F405 WING APP Fixed Wing Flight Controller

SpeedyBeeSKU: SB-F405WING-APP
2 reviews

Price:
Sale price$75.95

Shipping calculated at checkout

Stock:
In stock (4 units), ready to be shipped

Description


SpeedyBee F405 WING APP
SpeedyBee F405 WING APP
SpeedyBee F405 WING APP
SpeedyBee F405 WING APP
SpeedyBee F405 WING APP
SpeedyBee F405 WING APP
SpeedyBee F405 WING APP
SpeedyBee F405 WING APP
SpeedyBee F405 WING APP
SpeedyBee F405 WING APP
SpeedyBee F405 WING APP
SpeedyBee F405 WING APP
SpeedyBee F405 WING APP
SpeedyBee F405 WING APP
SpeedyBee F405 WING APP

Specifications

SpeedyBee F405 WING FC board
  • MCU STM32F405,168MHz,1MB Flash
  • IMU(Gyro&Accelerometer) ICM-42688-P
  • Barometer SPL006-001
  • OSD Chip AT7456E
  • Blackbox MicroSD Card Slot
  • UART 6 sets(USART1, USART2, USART3, UART4, UART5, UART6(Dedicated for Wireless board Telemetry connection))
  • I2C 1x Used for magnetometer, digital airspeed sensor
  • ADC 4x (VBAT, Current, RSSI, Analog AirSpeed)
  • PWM 12x (11+1“LED”pad)
  • ELRS/CRSF receiver Supported,connected to UART1
  • SBUS Built in inverter for SBUS input (UART2-RX)
  • LED 3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red) 1x RGB
  • RSSI Supported,Named as RS .
  • Supported FC Firmware INAV:SpeedyBeeF405WING(default)ArduPilot: SpeedyBeeF405WING


SpeedyBee F405 WING PDB board
  • Input voltage range 7~36V (2~6S LiPo)
  • Battery Voltage Sensor Connect to FC board VBAT, 1K:10K (Scale 1100 in iNav, BATT_VOLT_MULT 11.0 in ArduPilot)
  • Battery Current Sensor 90A continuous, 215A peak Connect to FC board Current (Scale 195 in iNav, 50 A/V in ArduPilot)
  • TVS Protective diode Yes
  • FC BEC output Output 5.2V +/- 0.1V DC Continuous current 2.4 Amps, 3A Peak Designed for FC, Receiver, GPS module, AirSpeed module, Telemetry module, WS2812 LED_Strip
  • VTX BEC output Output 9V +/- 0.1V DC Continuous current 1.8 Amps, 2.3A Peak Voltage adjustable, 9V Default, 12V or 5V via jumper Designed for Analog Video Transmitter,Digital Video Transmitter, Camera.
  • Servo BEC output Output 4.9V +/- 0.1V DC Continuous current 4.5 Amps, 5.5A Peak Voltage adjustable, 4.9V Default, 6V or 7.2V via jumper Designed for Servos.


SpeedyBee F405 WING Wireless board
  • Wireless Configuration (long press BOOT button for 6 seconds to switch modes) BLE mode, connect to Speedybee APP
  • Wi-Fi mode, connect to QGroundControl APP, Speedybee APP, MissionPlanner, etc.
  • Classic Bluetooth SPP mode, connect to QGroundControl APP, MissionPlanner
  • LED strip controller (short press BOOT button to switch effects, long press 2 seconds to switch modes) 4x WS2812 LED strip connectors, adjustable colors and flashing modes
  • 4x WS2812 LED strip connectors, adjustable colors and flashing modes
  • On-board battery level indicator 4x RGB indicator LED for battery level display by number of lights
Manual

UserManualEnglish


Estimate shipping

You may also like

Recently viewed