SpeedyBee F7 Mini 35A 3-6S 8-bit Flight Controller Stack

Save 17%
3 reviews

Sale price$157.95 Regular price$190

Shipping calculated at checkout

Contact Us


SpeedyBee F7 Mini 35A 3-6S 8-bit Flight Controller Stack

  • Product Name SpeedyBee F7
  • MCU STM32F722
  • IMU(Gyro) BMI270 for current batches; MPU6000 for old batches before May 2022
  • USB Port Type Type-C
  • Barometer N/A
  • OSD Chip AT7456E chip
  • BLE Bluetooth Supported. Used for Flight Controller configuration (MSP should be enabled with Baud rate 115200 on UART 6)
  • Flash FC Firmware Wirelessly Not supported. Please update firmware for this FC on the PC
  • Download/Analyze Blackbox Not supported. Please download and analyze Blackbox data on the PC
  • DJI Air Unit Soldering Pads Supported
  • Flash(for BlackBox) 8MB
  • Current Sensor Supported, Scale=250 Offset=-500
  • BetaFlight Camera Control Pad Yes(CC pad)
  • Power Input 3S - 6S Lipo
  • 5V Output 6 groups of 5V output, five +5V pads and 1 BZ+ pad( used for Buzzer). The total current load is 2.5A.
  • 9V Output 2 groups of 9V output, the total current load is 2A.
  • 3.3V Output Supported. Up to 500mA current load.
  • ESC Signal Pads M1 - M4
  • UART Full UART * 3(UART1, UART2, UART3)
  • ESC Telemetry UART R4(UART4)
  • I2C Not supported
  • LED Pad Used for WS2812 LED
  • Buzzer BZ+ and BZ- pad used for 5V Buzzer
  • BOOT Button Used to enter DFU mode
  • RSSI Input Not supported
  • SmartPort Use any TX pad of UART for the SmartPort feature.
  • Supported Flight Controller Firmware BetaFlight(Default), EMUFlight, INAV
  • Firmware Target Name SPEEDYBEEF7MINIV2 for current batches(Gyro: BMI270); SPEEDYBEEF7MINI for old batches(Gyro: MPU6000) before May 2022.
  • Mounting 20 x 20mm, 3.5mm hole diameter
  • Dimension 30 x 30 x 7.5mm
  • Weight 5.7g
  • Product Name SpeedyBee 35A BLHeli_S Mini 4-in-1 ESC Specs
  • Firmware BLHeli_S JH40
  • Continuous Current 35A * 4
  • Burst Current 45A(5S)
  • ESC Protocol DSHOT300/600
  • Power Input 3-6S LiPo
  • Power Output VBAT
  • Current Sensor Support (Scale=250 Offset=-500)
  • Mounting 20 x 20mm, 3.6mm hole diameter
  • Dimension 35 * 35 * 5.5mm
  • Weight 7g

You may also like

Recently viewed