Tattu R-Line Version 6.0 1300mAh 22.2V 160C 6S1P Lipo Battery Pack With XT60 Plug

Tattu R-Line Version 6.0 1300mAh 22.2V 160C 6S1P Lipo Battery Pack With XT60 Plug

Tattu R-Line Version 6.0 Key Features

1. Higher Energy Density, Safer Design

With a new lithium salt formula and semi-solid electrolyte, the battery reaches a volume energy density of 316Wh/L (+26%) and a weight energy density of 160Wh/kg (+17%). Reduced liquid content also means better safety and longer battery life.

2. Stable Power with 3D Conductive Tech

A combination of conductive graphite, carbon nanotubes, and graphene builds a solid 3D network, allowing efficient and steady high-current output. Power remains stable even during intense bursts.

3. Faster Response with Nano Materials

Nano-particle material and porous electrode structure shorten ion diffusion paths and reduce internal resistance (IR) by 20%, enabling quicker throttle response and stronger bursts of power.

4. Stronger Structure, Better Durability

The improved internal design enhances heat dissipation and impact resistance. Whether you’re crashing in freestyle or pushing hard in a race, R-Line V6 stays dependable.

5. Same Performance, Two Shapes

• SQ Short Version: Focused center of gravity, improved handling.
• ST Stick Version: Standard dimensions, flexible placement.

NOTE: Please do not choose expedited shipping unless you live in greater Sydney as batteries cannot be shipped by Air.

Specifications:

• Capacity: 1300mAh
• Configuration: 6S1P / 22.2V / 6 Cells
• Discharge Rate: 160C
• Net Weight: 220g
• Dimensions: 78 x 39 x 33mm (L x W x H)
• Discharge Plug: XT60
• Balance Plug: JST-XHR
  

Ideal For FPV Racing, Freestyle and Cinematic.

Lipo Battery Safety 

• Batteries should NEVER be left unattended while charging.
• Be absolutely sure that the Lithium Polymer charger settings are correct for the battery pack being charged – both voltage and current settings.
• Lithium Polymer must be CHARGED and STORED in a fire-safe container like a Lipo Sack.
• Do not charge batteries near flammable items or liquids.
• Keep a dry fire extinguisher nearby or a large bucket of dry sand, which is a cheap and effective extinguisher.
• Never charge inside an automobile even when parked.
• KEEP BATTERIES AWAY from children and pets at ALL times.
• Never discharge below 3.5V per cell as it may cause permanent damage and void warranty
• Battery may explode if damaged or disposed of in fire
• Never leave batteries inside a car on a hot day or any other place where temperature may exceed 140F / 60C.
• Although environmentally friendly, lithium polymer cells must be FULLY discharged before disposal. Use a resistor setup (light bulbs, for example) to accomplish this, to avoid the possibility of a short-induced fire after disposal.
• Immediately discharge damaged batteries at 1/2 C rate and dispose
• Do not put the loose cells in a pocket, bag, or drawer where they could short-circuit against other items, or the battery tabs could be pressed against each other.
• Take care that the cells are not punctured, especially by metallic objects like hobby knives.
• If the electrolyte in the cells should get on your skin, thoroughly wash with soap and water. If in the eyes, rinse thoroughly with cool water. Immediately seek medical attention for this, or for burns.